Product Archive
For every product comes the time, in which it is replaced by a new
generation of products, and is no longer produced. This archive
contains all the Seeburg loudspeaker and electronic products which
are no longer in production. Some of these products, however, are
still available on a made to order basis.
19“ Double Door Racks
|
08.2014 SEEBURG 19“ Racks
A robust road case rack equipped with removable lids with butterfly catches front and back, variable rack mounts front and back, four handles to allow vertical or horizontal carrying and ball corners. In house quality production.
|
19“ Double Door Racks
10510 |
19" x 6 Rack Units |
10515 |
19" x 8 Rack Units |
10520 |
19" x 10 Rack Units |
|
19“ Slide Door Racks
|
05.2017 SEEBURG 19“ Racks
Integrated slide-in doors ensure quick and easy set-up. 4 butterfly catches on each rack enable multiple racks to be locked together to form a larger single unit. The closable cable outlets allow easy cable connection between racks. |
19“ Slide Door Racks
10002 |
3 Rack Unit |
10003 |
4 Rack Unit |
10010 |
7 Rack Unit |
|
A 1 (MK-I)
|
06.2016 Atelier-Series
-> Serial No. 03688 New Version A 1 MK-II (Order No. 00210/II)
Universal small format loudspeaker for high quality music and speech reproduction. Well suited for applications in Pubs, Bistros and Cafes, and as a universal near field system. 3 x M10 mounting points provide for easy installation. (TR-version with 100 V transformer)
Further information -> DOWNLOADS |
A 1 (MK-I)
00210 |
100 W AES,
8 Ω |
00210/TR |
TR-Version with 100 V transformer,
as above |
|
A 1 Sub (MK-I)
|
11.2013 Atelier-Series
A 1 Sub -> 10-2017 -> Serial No. 00431 New Version A 1 Sub MK-II (Order No. 00220/II)
A 1 Sub dc -> 11-2013
Subwoofer extension for the A 1. The 12” long-excursion chassis utilises a double-bandpass cabinet, ensuring very deep and punchy bass response. The cabinet features 8 x M8 mounting points for installation.
A 1 Sub dc: Subwoofer extension for the A 1 for satellite system applications.
|
A 1 Sub (MK-I)
00220 |
500 W / 1500 W
(AES / Peak),
8 Ω |
00220/dc |
Double coil,
2 x 150 W /2 x 450 W,
(AES / Peak),
2 x 4 Ω |
|
A 2 (MK-I)
|
06.2016 Atelier-Series
-> Serial No. 01776
An unobtrusive and elegant HiMid system for permanent installations and coporate applications. The classic 2 x 6.5”/1” combination provides for clear and transparent speech reproduction and a good throw. Four M10 mounting points, and a fifth as an optional alternative to the speaker stand socket, in combination with the comprehensive accessory range, allow simple vertical or horizontal mounting. (TR-version with 100 V transformer)
Further information -> DOWNLOADS |
A 2 (MK-I)
00230/16 |
150 W AES,
16 Ω |
00230/16/TR |
TR-Version with
100 V Transformer,
as above |
|
A 2 (MK-II)
|
06.2019 Atelier-Series
-> 06-2019 -> Serial No.: from 01777 to 02188 New Version A 2 MK-III (Order No. 00230/III)
An unobtrusive and elegant Hi - Mid system for permanent installations and coporate applications. The classic 2 x 6.5” Nd / 1” combination provides for clear and transparent speech reproduction and a good throw. Four M10 mounting points, and a fifth as an optional alternative to the speaker stand socket, in combination with the comprehensive accessory range, allow simple vertical or horizontal mounting. (TR-version with 100 V transformer)
Further information -> DOWNLOADS |
A 2 (MK-II)
|
A 3 (MK-I)
|
04.2016 Atelier-Series
-> Serial No. 00915 New Version A 3 MK-II (Order No. 00240/II)
High output universal high - mid system fitted with a classic 2 x 8“ / 1“ driver combination. Equally suited as a strong top in combination with a subwoofer or as a stand alone system for speech reproduction over short to medium distances. Four M10 mounting points, and a fifth as an optional alternative to the speaker stand socket, in combination with the comprehensive accessory range, allow simple vertical or horizontal mounting.
Further information -> DOWNLOADS |
A 3 (MK-I)
|
A 4 (MK-I)
|
12.2016 Atelier-Series
-> Serial No. 02408 New Version A 4 MK-II (Order No. 00250/II)
Multifunctional 10“ Nd/1“ system with well balanced sound characteristics in a compact cabinet. The use of Neodym drivers ensures light weight. This system provides good bass reproduction even without the proprietary controller. A variety of M8 and M10 mounting points provide for easy mounting of the accessory hardware and installation.
Further information -> DOWNLOADS |
A 4 (MK-I)
00250/II |
250 W AES,
8 Ω |
00250/AF/II |
Version for permanent installation,
as above |
|
A 6 (MK-I)
|
03.2015 Atelier-Series
A 6 -> 06-2016_Serial No. 4493 New Version A 6 MK-II (Order No. 00260/II)
A 6 dp -> 03-2015_Serial No. 0303 New Version A 6 dp MK-II (Order No. 00260/II/dp)
Multifunctional 12“/1“ cabinet with very linear sound reproduction. Equally suited to use as a high quality fullrange/HiMid unit or in monitor applications. The rotatable 1” DPC (=Dual Pattern Control) horn maintains a constant 90° x 60° dispersion over a wide frequency range.
The A 6 as selfpowered dp-version with a DSP controlled 2 x 500 Watt amplifier.
Further information -> DOWNLOADS |
A 6 (MK-I)
00260 |
400 W AES,
8 Ω |
00260/AF |
Version for permanent installation,
as above |
00260/dp |
Selfpowered Version,
2 x 500 W AES bi-amped |
|
A 8 (MK-I)
|
06.2016 Atelier-Series
-> Serial No. 02093 New Version A 8 MK-II (Order No. 00270/II)
Multifunctional 15“/1“ cabinet with a very broad frequency range and well balanced sound characteristics. With performance similar to the A 6, but with extended bass response, the A 8 is a universal full range audio tool. A variety of M8 and M10 mounting points provide for easy mounting of the accessory hardware and installation.
Further information -> DOWNLOADS
|
A 8 (MK-I)
00270 |
400 W AES,
8 Ω |
00270/AF |
Version for permanent installation,
as above |
|
HDLM
|
06.2016 Atelier-Series
-> until Serial No. 0985
15” Sub-extension for the A 8. Switch activated crossover for passive operation. Large, low-loss bass reflex chambers and the Neodym chassis with a 100 mm voice coil ensure exceptionally punchy and powerful bass response down to 40 Hz.
Further information -> DOWNLOADS |
A 8 Sub
00280 |
600 W / 1800 W
(AES / Peak),
8 Ω |
|
B 1502
|
11.2013 K-Series
The B 1502 is a subwoofer with High-Performance-Bassreflex-Technology. 2 x 15” Sub with easy handling, high efficiency and good throw. The system can be used both horizontally and vertically. 2 x M20 thread for speaker pole, fittings for wheelboard on the front. Further information on the different versions > Downloads |
B 1502
01053 |
passive Version |
01053/dp |
selfpowerd Version with 2000 Watt |
01053/BF |
passive Version for Installation |
|
B 18 dc
|
12.2003 Atelier-Series
Passive bass extension for two A 2/ A 3 HiMids (4 Ohm) requiring only one stereo amplifier. Low weight due to 18" Neodym double coil driver. |
B 18 dc
01056 |
2 x 400 W / 2 x 1200 W (AES/Peak) |
|
B 1801
|
11.2013 K-Series
The B 1801 is a high performance bass reflex subwoofer. The newest generation of compact 18" subs. Easy to handle, good throw and efficiency. M20 flange, fittings for a front cover. Further information on the different versions > Downloads |
B 1801
01055 |
passive Version
800 W / 2400 W (AES/peak), 8 Ω |
01055/BF |
passive Version for Installation
800 W / 2400 W
(AES/peak), 8 Ω |
01055/dp |
selfpowered Version 1500 Watt (EIAJ) |
01055/dc |
passive bass extension
2 x 400 W / 2 x 1200 W (AES/Peak), 2 x 4 Ω |
|
C 1 / B 15dc
|
12.2002 Satellite-System
Consisting of 2 x C 1 with B 15dc mono Subwoofer. |
C 1 / B 15dc
|
C 1 / B 18dc
|
12.2002 Satellite-System
Consisting of 2 x C 2 with B 18dc mono Subwoofer. |
C 1 / B 18dc
|
C 1 MK II
|
12.2002 K-Series
2 x 6.5” + Tweeter, 120 Watt, 4 or 16 Ohm. Small, but strong HiMid system for fixed installation and industrial presentations by standard points of flight. |
C 1 MK II
|
C 2
|
12.2002 K-Series
2 x 8” Loudspeaker with concentric 1” Horn (90 x 40 degree) for more performance and precise mid-treble reproduction. 200 Watt. In 4 or 16 Ohm available. Standard M10 points for accommodation handles. |
C 2
|
C 2 / B 18dc
|
12.2002 Satellite-System
Consisting of 2 x C 1 with B 18dc mono Subwoofer. |
C 2 / B 18dc
|
CB 15
|
12.2004 C-Series
1 x 15” Subwoofer, Longcoil, 500 Watt. Impulse loyalty bass playback and high maximum stress. Like also the CB 212 / CB 215 Subwoofer equipped with an insertable switch for the application as passive system. |
CB 15
|
CB 212
|
12.2004 C-Series
2 x 12” Longcoil with altogether 600 Watt maximum stress guarantee very precise and distortion-free bass playback. Passiv/Active circuit. |
CB 212
|
CB 215
|
12.2004 C-Series
Two 15” Longcoils with 1000 Watt maximum stress for strong bass playback. Passiv/Active circuit. |
CB 215
|
CM 12
|
12.2004 C-Series
Compact 12”/1” Floormonitor with 300 Watt maximum stress. By M10 point for high stand flange also as Fullrangebox universally applicable. |
CM 12
|
Connection Panel CP 01407
|
05.2019 19“ Accessories
• 1 RU • 2 x XLR in / loop thru • 4 x Speakon out NL4
Backside Cabeling: • 4 x NL2 FC • 2 x XLR • 2 x Speaker (Sub) |
Connection Panel - CP 01407
CP 01407 |
Connection Panel |
|
Connection Panel - CP 01408
|
05.2019 19“ Accessories
• 1 RU • 2 x XLR in / loop thru • 4 x Speakon out NL4 • 2 x NL8 for GALEO XT
Backside Cabeling: • 4 x NL2 FC • 2 x XLR • 2 x Speaker (Sub) |
Connection Panel - CP 01408
CP 01408 |
Connection Panel |
|
CT 12
|
12.2004 C-Series
Fullrange/HiMid system with 12” Woofer and 1” Horn. Radialhorn 90 x 40 degree, 300 Watt, 8 Ohm, with 3 x M8 points for fixed installations. |
CT 12
|
CT 15
|
12.2004 C-Series
Classical, strong 15”/1” Combination with 300 Watt / 8 Ohm. 90 x 40 degree of Radialhorn. 3 x M8 of points. |
CT 15
|
CT 212
|
12.2004 C-Series
Very effective HiMid/Fullrangesystem with strong low mid-frequency reproduction. 2 x 12” Loudspeaker with 600 Watt maximum stress. 3 x M8 of points. |
CT 212
|
E 18
|
12.2000 K-Series
Kompakte Version der E 218. 1 x 18”, 800 Watt, 8 Ohm, hornloaded, M20 Flansch. |
E 18
|
E 218
|
12.2000 K-Series
High speed Subwoofer with 2 x 18” drivers for fastidious Road using, with which a dynamic bass playback and a high range are required. 2 x 18”, 1600 Watt, 4 Ohm, hornloaded, roles. |
E 218
|
G 3
|
05.2023 G 3
The G 3 system is a Curved Cylindrical Wave Radiator featuring the same technology as the GALEO Line Array. A single G 3 element is fitted with six 8” low-mid drivers and three 1.4” HF drivers in a 2-way active configuration, and has a fixed vertical dispersion of 20°. By simply interchanging the horn located on the front of the cabinet, horizontal dispersion can be increased from 80° to 120°. The G 3 provides a longer throw, a higher sound level before distortion and a more precise directivity than a comparable conventional horn loaded system. The low end cut off at 80 Hz allows the G3 to harmonise very well with high power 18" or 21" sub woofers. The tilt and pivot bracket included as standard allows simple set up and alignment of the system. Separately available screw on flying hardware allows multiple G 3 units to be combined to form a larger system. Both ground stacked and flown applications are possible.
The G 3 system in the self powered dp-version with 4 DSP presets to suit various applications.
Further information -> DOWNLOADS |
G 3
00550/80 |
1500 W / 225 W AES, 5,3 Ω / 5,3 Ω
80° |
00550/120 |
1500 W / 225 W AES, 5,3 Ω / 5,3 Ω
120° |
00550/dp/80 |
selfpowered Version
2400 W / 700 W AES
80° |
00550/dp/120 |
selfpowered Version
2400 W / 700 W AES
120° |
|
G Sub
|
12.2019 G Subwoofers
The 18" G Sub is a universal high-performance subwoofer which produces high level, low distortion bass from 32 Hz upwards. The cabinet is designed for long throw and low power compression. A wheel board which mounts to the front of the cabinet for easy transport is available. The G Sub is a flexible and easy to handle tool suitable for many applications.
A self powered dp version fitted with a 1500 W amplifier is also available.
Aufbauvideo (avi) Aufbauvideo (swf) |
G Sub
00600/1,8kW |
1800 W / 5400 W
(AES / Peak), 8 Ω |
00600/dp |
Selfpowered Version, 2400 W AES |
|
G Sub 1201 dp
|
01.2015 G Subwoofers
The G Sub 1201 dp is a particularly flat, selfpowered high-performance 12” subwoofer. Four different presets and volume settings are available for adjustment to the application. With its large footprint it can accommodate GL- and other HiMid systems using speaker poles without toppling over. Easy handling, an exclusive and modern design and its deep bass reproduction make it a perfect choice for demanding applications. |
G Sub 1201 dp
|
Galeo
|
05.2019 GALEO Line Array System
The GALEO Line Array System is suitable for a wide range of sound applications for which a fast set-up, high sound quality, long throw and predictable directivity are crucial. The application of the patented AMR (Air Mass Reflection) principle and the optimised placement of the drivers provide an exceptionally homogenous and precise horizontal coverage. The Galeo is particularly suitable for high-end permanent installations.
The 80° version of the GALEO was developed for narrower audience areas and longer throw. The Galeo's AMR Reflectors in the 80° and the 120° version are interchangeable.
Further informations -> DOWNLOADS |
Galeo
00400/120 |
120°-Version,
2-way-active,
380 W / 80 W AES,
16 Ω / 16 Ω
|
00400/80 |
80°-Version
as above
|
|
Galeo Sub
|
05.2019 GALEO Line Array System
Bass extension for the GALEO system featuring integrated flying hardware for flown array applications and ground stack operation. Horn loaded bandpass technology and newly developed long excursion 18” ND high power drivers combine in the GALEO Sub to provide low distortion, long throw, high level bass.
The GALEO Sub is also available in the ground version (GV) ,without flying hardware and with additional handles and M20 mounting points.
GALEO Subs dp versions: The integrated Class D amplifier section provides 2400 Watt power and the DSP controller provides three filter presets, a switchable cardioid mode and several volume presets.
The file"GALEO Systems.efo" is available to download for use with simulation software "Ease Focus" (ex Version 1.4), to model your Galeo system.
Further information -> DOWNLOADS |
Galeo Sub
00405 |
3000 W / 9000 W (AES / Peak), 4 Ω |
00405/GV |
Ground Version
3000 W / 9000 W (AES / Peak), 4 Ω
|
00405/dp |
Selfpowered Version
2400 W AES |
00405/GV/dp |
Ground Version
Selfpowered Version
2400 W AES
|
|
Galeo XT
|
05.2019 GALEO Line Array System
A large fullrange line array system designed to satisfy the highest sound quality demands, the Galeo XT also boasts many innovative detail solutions to make the system easy to handle. The Galeo XT is fitted with 2 x 15” Nd woofers with bass reflex ports at the sides of the cabinet, 4 x 8” Nd mid-range drivers, and 2 x 1.4” Nd HF-drivers (3” diaphragm) behind the central waveguides.
The 80° horizontal coverage is obtained by implementation of the patented “Air Mass Reflection” principle to ideally combine the midrange and high frequency sound waves. With the appropriate controller setting, this provides absolutely smooth and consistent horizontal coverage. from 200 Hz upwards.
The file “GALEO Systems.efo” is available to download for use with the simulation software “Ease Focus” (ex Version 1.4), to model your Galeo XT system. |
Galeo XT
00380 |
3-way-active,
1000/1000/150 W AES,
8 Ω / 8 Ω / 8 Ω |
|
Galeo XT Sub
|
05.2019 GALEO Line Array System
Sub-bass extension for the GALEO XT system. A pair of newly developed 21“ woofers with a voice coil diameter of 135 mm and 70 mm maximum excursion (peak to peak) combine with the hybrid horn construction to ensure undistorted, very high level bass within the usable range from 33 to 150 Hz. The special housing design guarantees a long throw and low power compression for high-performance applications.
Further informations -> DOWNLOADS |
Galeo XT Sub
00390 |
3600 W / 10,8 kW
(AES / Peak), 2 Ω |
|
GL 16 dp 1500
|
01.2015 GL-Series
The GL 16 is a high-performance line array system for high definition voice and music transmission in acoustically challenging venues, particularly in long throw situations. The acoustic and mechanical properties of the GL 16 system make it particularly suitable as an alternative to conventional column speakers and compact line arrays. |
GL 16 dp 1500
00500/2x750W |
i-Version,
selfpowered
100° x 7°
2 x 750 W EIA |
00501/2x750W |
c-Version
selfpowered
100° x 30°
2 x 750 W EIA |
|
GL Sub (MK-I)
|
12.2022 GL-Series
GL Sub dp MK-I -> 03-2018 -> Seriennummer 0048 GL Sub dp MK-II -> 12-2022 -> Seriennummer 0083
The GL Sub dp is a dedicated Subwoofer for the GL 16 System. The cabinet is the same width as the GL 16, and the 140 cm height enables the optimal positioning of a GL 16 for a sitting or standing audience. The long excursion 12” speaker is powered by a 1000 Watt, DSP controlled amplifier. The GL Sub dp is designed for applications which require a unobtrusive GL 16 System with Subwoofer. |
GL Sub
00530/dp |
Selfpowered,
1000 W AES |
|
HDLM 8
|
04.2017 SEEBURG Controller
-> until 03.2017
The HDLM 8 Loudspeaker Management Controller is capable of managing more complex sound reinforcement systems. A web browser based user interface with multi-client capability allows real time access from a PC or a Mac to user-critical parameters for multiple users simultaneously. Excellent dynamics, a low distortion factor and filters with outstanding sound properties ensure first class audio quality.
A large high-definition colour display, clearly assigned buttons for navigation and input screens, and the USB port, enable hassle-free adjustments directly on the controller. When combined with a WLAN-USB stick, all functions can be controlled with the smartphone app goHDLM. The Linux based operating system of the HDLM 8 can optionally be upgraded with a 1000 Mbit Ethernet interface.
The API (application programming interface) makes it possible for any C programmer to fully access the HDLM 8. This allows, for example, direct control of presets, or any other control values, via a Crestron or AMX touch screen controller.
HDLM 8 (Firmware-Seite)
Further information -> DOWNLOADS |
HDLM 8
01402/II |
|
01402/ADAT |
ADAT interface 8 channel |
|
HDSC 2.4
|
12.2010 SEEBURG Controller
Digital High Definition System Controller for universal use. |
HDSC 2.4
|
K 2
|
04.2011 K-Series
Developed 12"/2" hornloaded system with 60 x 40 degrees dispersion. Ideal with the B 1801 subwoofer. Flying tracks on the top and M10 points for angling. Further information on the different versions > Downloads |
K 2
01025 |
passive Version |
01025/dp |
selfpowered Version,
2 x 1000 Watt |
|
K 215
|
09.2006 K-Series
Fullrange System with 1400 Watt power handling. Ideal as a small club system or drumfill. Wheels on the back. |
K 215
01011 |
1400 W / 4200 W
(AES/Peak), 4 Ω |
|
K 22
|
12.2011 K-Series
Based on the K 2 system, the new K 22 (2 x 12”/1.4”) achieves 140 dB spl max. Specially suited for clubs and concert venues in combination with the Subwoofer B 1801, TSE Sub or TSE infra. The K 22 comes with an integrated flying frame. Further information on the different versions > Downloads |
K 22
01027/a |
Version for bi-amp mode
800 W / 80 W AES
4 Ω / 8 Ω |
01027/xov |
Version with x-over
as above |
|
K 25
|
11.2013 K-Series
Fullrange PA system with 2 x 15" woofers and 1 x 1.4" hf-driver. Precise and powerful bass reproduction due to the 2-chamber hybrid construction (vented & bandpass). The tight pattern of the mid/high horn leads to a good throw with the sound quality being equal to larger horn systems. |
K 25
|
K 5
|
09.2011 K-Series
Hornloaded fullrange sytem (45 Hz - 18 kHz) for high quality sound reproduction. 15"ND + 1.4"ND speakers, 90 x 50 degrees dispersion. Combines well with the B 1801 subwoofers. |
K 5
|
M 1 (MK-I)
|
07.2016 M-Series
-> M 1 Serial No. 0194 -> M 1 dp Serial No. 0100
Ultra flat stage monitor fitted with lightweight coaxial 12” /1.4” Neodym drivers. With high power reserves, homogeneous sound distribution and low tendency to feedback, the M 3 is a tool that will greatly simplify a sound engineer’s job. Combined with the optional flying bracket, the system can also be used both as a downfill and as a univesal sound system.
The M 1 as self powered dp-version with 4 DSP presets to suit various applications.
Further information -> DOWNLOADS |
M 1 (MK-I)
01068 |
passive Version |
01068/dp |
selfpowered Version,
2 x 1000 W |
|
M 1 dp (MK-II)
|
02.2023 M-Series
-> Serial No. from 0101 to 0174
Ultra flat stage monitor fitted with lightweight coaxial 12” /1.4” Neodym drivers. With high power reserves, homogeneous sound distribution and low tendency to feedback, the M 3 is a tool that will greatly simplify a sound engineer’s job. Combined with the optional flying bracket, the system can also be used both as a downfill and as a univesal sound system.
The M 1 in the self powered dp-version with 4 DSP presets to suit various applications.
Further information -> DOWNLOADS |
M 1 dp (MK-II)
01068/dp/II |
selfpowered Version
2 x 1000 W EIAJ |
|
M 1501
|
12.2004 M-Series
Popular monitor system, with a strong bass playback and a present mid-treble range. 1 x 15”/1”, 300 Watt, 8 Ohm. |
M 1501
|
M 2
|
04.2012 M-Series
Ultra compact 12”/1.4” Coax system, developed for powerful stage monitoring. Flying tracks for use as downfill. |
M 2
|
M 212
|
12.2005 M-Series
High Power Monitor. Very high power reserves. High resolution reproduction and optimal feedback control make this monitor the master of every stage situation. |
M 212
|
M 3
|
09.2016 M-Series
-> 09-2016 -> Serial No. 0286
Ultra flat stage monitor fitted with lightweight coaxial 15” /1.4” Neodym drivers. With high power reserves, homogeneous sound distribution and low tendency to feedback, the M 3 is a tool that will greatly simplify a sound engineer’s job. Combined with the optional flying bracket, the system can also be used both as a downfill and as a univesal sound system.
The M 3 as self powered dp-version with 4 DSP presets to suit various applications.
Further information -> DOWNLOADS |
M 3 (MK-I)
01067 |
passive Version |
01067/dp |
selfpowered Version, 2 x 1000 W |
|
M 3 dp (MK-II)
|
02.2023 M-Series
-> Serial No. from 0287 to 0390
Ultra flat stage monitor fitted with lightweight coaxial 15” /1.4” Neodym drivers. With high power reserves, homogeneous sound distribution and low tendency to feedback, the M 3 is a tool that will greatly simplify a sound engineer’s job. Combined with the optional flying bracket, the system can also be used both as a downfill and as a univesal sound system.
The M 3 in the self powered dp-version with 4 DSP presets to suit various applications. |
M 3 dp (MK-II)
01067/II/dp |
selfpowered Version,
2 x 1000 W |
|
M 5
|
06.2009 M-Series
Ultra compact 15”/2” Coax system, developed for powerful stage monitoring. Flying tracks for use as downfill. |
M 5
|
MPA 6.6
|
12.2009 Amplifiers
6-channel Power Amplifier, 6 x 200 Watt / 4 Ohm. Passive cooling system for noisless operation. Great versatility due to switchable Crossovers, Input links and Bridge mode, therefore very suitable for fixed installations. |
MPA 6.6
|
Powerstick
|
12.2022 SEEBURG Powerstick
The Powerstick is an ultra slim, lightweight 2 x 500 W power amplifier with integrated DSP controller. It is designed to be integrated into the L-Series Monopod, and can also be mounted directly onto the rear side of an L-Series loudspeaker. Due to the compact form of the Powerstick, it can also easily be integrated into truss constructions or exhibition stands.
Various factory-configured presets and volume settings can be selected. The user can program custom presets with the LPI (Loudspeaker Programming Interface).
Further information -> DOWNLOADS
|
Powerstick
|
Powerstick (MK-I)
|
03.2015 SEEBURG Powerstick
-> Serial No. 045 New Version Powerstick MK-II (Order No. 00750/II/dp)
The Powerstick is an ultra slim, lightweight 2 x 500 W power amplifier with integrated DSP controller. It is designed to be integrated into the L-Series Monopod, and can also be mounted directly onto the rear side of an L-Series loudspeaker. Due to the compact form of the Powerstick, it can also easily be integrated into truss constructions or exhibition stands. |
Powerstick (MK-I)
|
SEEBURG S 3000 / S 1300
|
11.2021 Amplifiers
Modern electronics, classical design and excellent audio qualities are combined in the SEEBURG power amplifiers to provide a reliable work horse equally suited to installations and mobile systems. A 2 stage switching mode power supply ensures low weight and high efficiency. The highly effective copper heat sink cooling system and easily accessible high capacity air filters provide for easy and minimal maintenance.
Further information -> DOWNLOADS
|
SEEBURG S 3000 / S 1300
01822 |
S 3000
2 x 1150 W, 4 Ω |
01820 |
S 1300
2 x 550 W, 4 Ω |
|
SP 2
|
12.2001 SEEBURG Controller
2-way, stereo universal switch controller basic equipment. |
SP 2
|
SP 2.5
|
12.2013 SEEBURG Controller
2-way stereo analog controller for universal use. |
SP 2.5
|
SP 2/M
|
12.2002 SEEBURG Controller
Controller with first class analog technique with the possibilities of a digital controller. |
SP 2/M
|
TK 112
|
12.2008 K-Series
12"/2" cabinet for short to medium throw applications. Rotatable horn. Linear sound. Prepared for a flying shackle. |
TK 112
|
TK 115
|
12.2006 K-Series
High power HiMid system. Wide dispersion, easy to handle, high efficiency and medium throw. |
TK 115
|
TK 212
|
12.2007 K-Series
Wide dispersion HiMid system. Well proven in short to medium throw applications. |
TK 212
|
TKE 212
|
12.2002 K-Series
Horn loaded system with classic 2 x 12"/2" drivers and 60 x 40 degree dispersion. Features castors on the back, fittings for a front cover, and flying tracks. |
TKE 212
|
TPA 1500
|
12.2007 Amplifiers
2-way active 3-channel amplifier incl. crossover and limiter, 3 x Speakon out, temperature controlled fan. Ideally for Satellite-systems with subwoofer. |
TPA 1500
|
TS Mini
|
04.2016 TS-Series
Classic small format PA system particularly suited to applications such as permanent installions or Trade Fair stands. 6 x M10 mounting points in combination with the comprehensive range of accessories allow simple and flexible installation in a vertical or horizontal orientation. |
TS Mini
|
TS Mini Sub
|
04.2016 TS-Series
TS Mini Sub dc-> until Serial No. 00422 TS Mini Sub dc dp-> until Serial No. 00266
Compact 12” subwoofer with optimized bass-reflex tunnel design. Very compact subwoofer providing high SPL and solid deep bass response. Fitted with a 1000 Watt rated, long exursion 12" neodymium speaker with a 100 mm voice coil, the enclosure benefits from a particularly efficient and low loss bass reflex tunnel design.
Further information -> DOWNLOADS
|
TS Mini Sub
00992 |
passive Version, 8 Ω |
00992/dp+ |
selfpowered Version,
2 x 1000 Watt |
00992/dc |
double coil,
2x 500W / 2x 1500W
AES / Peak
2 x 4 Ω, X-over |
00992/dc/dp |
selfpowered Version,
double coil
2 x 500 Watt, X-over |
|
TS Mini Sub +
|
09.2007 TS-Series
Active Subwoofer for Mini Sat System. Bass extension to suit a pair of TSMini's. The high bass level is achieved by means of a 1000 Watt rated woofer with a extra long voice coil. The active model TSMini Sub plus contains an additional amplifier, intended to power an extra TSMini, for instance as a monitor.
Further information -> DOWNLOADS |
TS Mini Sub +
00994 |
800 W + 3 x 150 W / 1400 W + 3 x 200 W
(AES/Peak) |
|
TS Nano (MK-I)
|
06.2016 TS-Series
-> Serial No. 01957
Ultra-compact speaker system for high quality speech and music transmission over short to medium distances. Due to good speech intelligibility and high performance, the TSNano is particularly suitable for sophisticated permanent installations in the industrial sector.
Further information -> DOWNLOADS |
TS Nano (MK-I)
|
TS Nano (MK-II)
|
06.2020 TS-Series
Available on REQUEST.
Ultra-compact speaker system for high quality speech and music transmission over short to medium distances. Due to good speech intelligibility and high performance, the TSNano is particularly suitable for sophisticated permanent installations in the industrial sector.
Further information -> DOWNLOADS |
TS Nano (MK-II)
|
TSD 15
|
09.2003 TS-Series
Downfill for TSE System. 15”/2”Coax 500 Watt AES, 8 Ohm, MAN CF4 Fittings, Flying Tracks. |
TSD 15
|
TSE 4030
|
12.2007 TS-Series
The TSE 4030 system is a high performance sound reinforcement system for Array installations and general purpose use. The dispersion of 40 x 30 degree makes the system equally suitable for long throw applications. |
TSE 4030
00900 |
600 W / 1800 W
(AES/Peak), 8 Ω |
|
TSE 6040
|
12.2007 TS-Series
Its dispersion of 60 x 40 degree makes it perfect for medium throw use. A variety of new technical details lead to optimized performance. |
TSE 6040
00902 |
600 W / 1800 W
(AES/Peak), 8 Ω |
|
TSE infra
|
04.2016 TS-Series
-> until Serial No: 00524
The TSE infra is a large volume, high power Subwoofer particularly suited to applications which demand long throw, high efficiency low bass reproduction. The 2 chamber, horn loaded band pass operating principle of the TSE infra allows it to operate effectively over a very wide frequency range from 35 Hz to 130 Hz. A range of power handling capacities are available to suit individual applications. |
TSE infra
00920 |
1600 W / 4800 W
AES / Peak, 4Ω |
00920/3KW |
3000 W / 9000 W
AES / Peak, 4Ω |
|
TSE Sub
|
11.2013 TS-Series
The TSE Sub is a powerful subwoofer to match the TSE series. Very efficient system due to hybridhorn-technology. The TSE Sub is also available as selfpowered dp-version with an 1500 Watt amplifier, controlled by a DSP.
Further information > Downloads |
TSE Sub
00910/GV |
passive Version, 18”, 800 W / 2400 W
(AES/Peak), 8 Ω |
00910/GV/dp |
selfpowered Version, 18” Nd, 1500 W EIAJ |
|
TSM 10 (MK-I)
|
06.2016 TS-Series
TSM 10 -> 06/2016_Serial No. 02226 TSM 10 dp -> 03/2015_Serial No. 00174
The TSM 10 is a multifunctional top class system in compact format. Fitted with a rotatable horn, and lightweight high efficiency Neodym drivers, the TSM 10 is equally well suited to use as a full range / high mid PA loudspeaker and to monitor applications.
The TSM 10 as selfpowered dp-version with a DSP controlled 2 x 500 Watt amplifier.
Further information -> DOWNLOADS |
TSM 10 (MK-I)
00960 |
400 W AES
8 Ω |
00960/dp |
Selfpowered Version
2 x 500 W AES
(bi-amped) |
|
TSM 10 (MK-II)
|
01.2020 TS-Series
Available on REQUEST.
The TSM 10 is a multifunctional top class system in compact format. Fitted with a rotatable horn, and lightweight high efficiency Neodym drivers, the TSM 10 is equally well suited to use as a full range / high mid PA loudspeaker and to monitor applications.
The TSM 10 as selfpowered dp-version with a DSP controlled 500 Watt / 150 W AES amplifier.
Further information -> DOWNLOADS |
TSM 10 (MK-II)
00960/II |
400 W AES
8 Ω |
00960/II/dp |
Selfpowered Version
500 W / 150 W AES
(bi-amped) |
|
TSM 12 (MK-II)
|
01.2020 TS-Series
Available on REQUEST.
Multifunctional high-end loudspeaker system with 12” /1.4” neodymium drivers and a rotatable 90°x60° horn. High output and speech intelligibility combined with low weight and compact size make it a very popular system. The TSM 12 is optimised for monitor applications, however it is equally suited to classic full range sound reinforcement applications, and can be mounted vertically or horizontally.
The TSM 12 as selfpowered dp-version with a DSP controlled 1000 Watt / 350 Watt AES amplifier.
Further information -> DOWNLOADS |
TSM 12 (MK-II)
00958/II |
600 W AES
8 Ω |
00958/II/dp |
Selfpowered Version
1000 W / 350 W AES
|
|
TSM 12 dp (MK-I)
|
10.2015 TS-Series
-> Serial No. 0222 (10-2015)
The TSM 12 dp is a multi purpose, high-end loudspeaker system featuring integrated digital amplifier electronics with 2 x 1000 Watt power and a DSP controller. The 12“ long excursion Neodym low-mid driver and the 1.4“ Neodym HF driver with 3“ coil are each driven by a separate amplifier channel. A range of factory-configured presets and volume settings can be selected. A wide range of possibilities for mounting flying accessories make the TSM 12 dp an interesting option for permanent installations.
Further information -> DOWNLOADS |
TSM 12 dp (MK-I)
00958/dp |
Selfpowered Version
2 x 1000 W EIA |
00958 |
600 W AES, 8 Ω |
|
TSM 15 (MK-I)
|
12.2008 TS-Series
Sophisticated and flexible top class fullrange / monitor system, expandable with the TSM 15 Sub. An ideal compact PA, passively or actively driven. Also ideally suited as downfill, nearfill, or drumfill. The horn is rotatable. |
TSM 15 (MK-I)
|
TSM 15 (MK-II)
|
01.2020 TS-Series
Available on REQUEST.
The TSM 15 is a multi-functional high-end loudspeaker. It has been optimised for use as a monitor, however the rotatble horn makes the TSM 15 equally suited to classic fullrange sound reinforcement applications, either vertically or horizontally mounted. A wide range of possibilities for mounting flying accessories and a discreet, modern design make the TSM 15 an interesting option for permanent installations. For applications requiring a longer throw, the TSM 15 can be fitted with a narrower horn with a coverage angle of 60° x 50°.
The TSM 15 as selfpowered dp-version with a DSP controlled 2 x 1000 Watt amplifier.
Further information -> DOWNLOADS |
TSM 15 (MK-II)
00950/II/90x60 |
90° x 60° - Version
600 W AES |
00950/II/60x50 |
60° x 50° - Version
600 W AES |
00950/II/ 90x60/dp |
Selfpowered Version
90° x 60° - Version
1000 W / 350 W AES |
00950/II/ 60x50/dp |
Selfpowered Version
60° x 50° - Version
1000 W / 350 W AES
|
|
TSM 15 dp (MK-I)
|
10.2015 TS-Series
TSM 15/60x50/dp -> Serial No. 00047 (10-2015) TSM 15/90x60/dp -> Serial No. 00059 (04-2016)
The TSM 15 dp is a multi-functional high-end loudspeaker system featuring integrated digital amplifier electronics with 2 x 1000 Watt power and a DSP Controller. The 15“ Neodym / 1.4“ Neodym driver are each driven by a separate amplifier channel. A range of factory-configured presets and volume settings can be selected. It has been optimised for use as a monitor, however the rotatable horn makes the TSM 15 dp equally suited to classic fullrange sound reinforcement applications, either vertically or horizontally mounted. A wide range of possibilities for mounting flying accessories make the TSM 15 dp an interesting option for permanent installations.
Further information -> DOWNLOADS |
TSM 15 dp (MK-I)
00950/90x60/dp |
Selfpowered Version
90° x 60° - Version
2 x 1000 W EIAJ |
00950/60x50/dp |
Selfpowered Version
60° x 50° - Version
2 x 1000 W EIAJ |
|
TSM 15 Sub
|
06.2008 TS-Series
15” bass subwoofer extension for TSM 15. Integrated passive crossover, switchable. |
TSM 15 Sub
00951 |
600 W / 1800 W
(AES/Peak), 6 Ω |
|
TSM 8 (MK-I)
|
11.2016 TS-Series
-> TSM 8 (MK-I) until 11.2016
Multifunctional and compact speaker system for high quality speech and music transmission over short to medium distances. State of the art high performance components combined with the practical enclosure design and the extensive range of accessories make the TSM 8 suitable for a wide variety of demanding applications.
Further information -> DOWNLOADS |
TSM 8 (MK-I)
|
TSM 8 (MK-II)
|
01.2020 TS-Series
Available on REQUEST.
Multifunctional and compact speaker system for high quality speech and music transmission over short to medium distances. State of the art high performance components combined with the practical enclosure design and the extensive range of accessories make the TSM 8 suitable for a wide variety of demanding applications.
Further information -> DOWNLOADS |
TSM 8 (MK-II)
|
TSM 8 dp
|
01.2020 TS-Series
Available on REQUEST.
Multifunctional and compact speaker system for high quality speech and music transmission over short to medium distances. State of the art high performance components combined with the practical enclosure design and the extensive range of accessories make the TSM 8 dp suitable for a wide variety of demanding applications. With an integrated digital amplifier providing 500/150 Watt AES of power an DSP control. A range of factory-configured presets and volume settings can be selected.
Further information -> DOWNLOADS |
TSM 8 dp
00968/dp |
Selfpowered Version
500 W / 150 W AES
8 Ω |
|
TSM Sat+
|
12.2005 Satellite-System
Powerful satellite system for versatile music and sound reinforcement applications. The system includes 2 x TSM 10 cabinets and the TSM Sub + active bass extension. Its power handling of 2.6 kW ensures a clean sound reproduction up to the limit. |
TSM Sat+
|
TSM Sub
|
01.2020 TS-Series
Available on REQUEST.
The TSM Sub is a high-power universal subwoofer. The 15” Neodymium driver provides accurate and efficient bass reproduction over a wide frequency range. An integrated switchable passive crossover allows the TSM Sub to be used either in conjunction with an external active crossover, or as part of a passive 2 way system.
The TSM Sub as selfpowered dp+ version with a 2 channel DSP controller and 2 x 1000 Watt amplifier.
Further information -> DOWNLOADS |
TSM Sub
00974 |
500 W / 1500 W
AES / Peak, 8 Ω |
00974/dp+ |
Selfpowered version,
2 x 1000 W AES |
|
TSM Sub +
|
09.2007 TS-Series
Powered bass extension for 2 x TSM 10 speakers. Fittings for a wheelboard on front. |
TSM Sub +
00972 |
800 W + 2 x 400 W / 1400 W + 2 x 600 W
(AES/Peak) |
|
TSMini-Sat +
|
12.2005 Satellite-System
The 2-Way Mini-PA features 2 x TSMini and is available with active or passive bass extension. The active version TSMini Sub+ includes an additional amplifier, intended to power an additional TSMini, which can be used as monitor. |
TSMini-Sat +
|