A 3 HiMid Sound System
A 3
00240/II |
500 W AES, 4 Ω (16 Ω optional) |
00240/II/dp |
500 W /150 W AES |
 Downloads |
|
| Data Sheet A3 |
 |
| Data Sheet A3 dp |
|
| User Manual A3 dp |
|
| 3D-Files A3 |
 |
| 3D-Files A3 Bracket |
|
| TESTIMONIAL A 3 / G Sub 1501 dp+_de (tools4music-01/2017) |
|
| Tender Texts |
|
| Product Pictures |
|
High output universal high - mid system fitted with a classic 2 x 8" Nd / 1" driver combination. Equally suited as a strong top in combination with a subwoofer or as a stand alone system for speech reproduction over short to medium distances. Four M10 mounting points, and a fifth as an optional alternative to the speaker stand socket, in combination with the comprehensive accessory range, allow simple vertical or horizontal mounting.
The A 3 is also available in the dp-version with an integrated,
DSP controlled 500 Watt / 150 Watt AES amplifier.
| A 3 | A 3 dp | |
| Speaker Components | 2 x 8“ Nd / 1” | 2 x 8“ Nd / 1” |
| Description | HiMid Sound System | HiMid Sound System |
| Power AES / Peak | 500 W / 1500 W | - - - |
| Amp Power | - - - | LF: 500 W AES / 110-230 V HF: 150 W AES / 110-230 V |
| Impedance nominal | 4 Ω (16 Ω optional) | - - - |
| Rated Current | - - - | 0,6 A @ 230 V |
| SPL 1 W / Peak @ 1 m |
100 dB / 132 dB | - - - |
| SPL Peak@1m | - - - | 132 dB |
| Max. Input Signal | - - - | 25 dBu |
| DSP | - - - | HDLM FPGA Processing 32 bit floating point |
| AD / DA | - - - | 24 bit / 96 kHz |
| Latency | - - - | 0,8 ms (analog in to analog out) |
| Usable Range |
80 Hz - 20 kHz (-6 dB) | 80 Hz - 20 kHz (- 6 dB) |
| Tuning Frequency excursion minimum | 90 Hz | 90 Hz |
| X - Overpoint acoustical | 1,4 kHz | Depends on preset |
| Coverage horizontal / vertical | 90° x 60° rotatable | 90° x 60° rotatable |
| Max. Splay Angle | - - - | - - - |
| Connectors | 2 x Speakon NL4MP in/out Coding: 1 +/- HiMid, 2 +/- loop through |
XLR in/thru, Ethercon, |
| Handles | 1 x | 1 x |
| Rigging / Fittings | 4 x M10 2 x M6 35 mm pole mount |
4 x M10 2 x M6 35 mm pole mount |
| Weight | 12,5 kg | 13,5 kg |
| Size height x width x depth | 59,0 x 25,0 x 25,0 cm | 59,0 x 25,0 x 25,0 cm |
| Order No. | 00240/II | 00240/II/dp |
for A 3, padded
Order No. 01258
for A 3
for 2 pcs. A 3 and accessories, standard, 7 mm birch multiplex, PVC coated,
hinged lid, 2 x recessed sprung handles,
2 x butterfly catches, 4 x 100 mm blue wheels, 2 pcs. with brake, rubber feet, partition walls, interior lined with felt
for A 3
horizontal alignment,
incl. (2 x M10 x 20 socket head screws,
2 x rubber washers, 1 x plate)
Order No. 01215/H/set/w (RAL 9010)
for A 3
incl. (black version: 2 x M10 x 20 handle screws, 2 x rubber washers
white version: 2 x M10 x 20 socket head screws, 2 x rubber washers)
Order No. 01215/set/w (RAL 9010)
adjustable
M10 x 20
for A 2 / A 3 flying brackets,
horizontal alignment,
replacement for pole mount flange,
110 mm ø flange with M10 nut
Order No. 08119/M10/w (RAL 9010)
for flying brackets,
5 mm x 40 mm ø
with ball and socket joint,
with additional locking screw,
M10 x 15,
max. load 15 kg
reduction screw for fastening
M10 pole mount adapter (08126)
35 mm ø –> M10 x 16 mm,
M8 x 20 star knob screw
max. load 100 kg
Order No. 01223/100kg
incl. M10 Adapter,
max. load 15 kg
M10, max. load 20 kg
Order No. 01223/20kg
M10– DIN 580
black zinced
Order No. 73700/sw
zinced
10 mm internal thread,
28 mm ø
VBS 7 mm
Order No. 01378
6 mm x 600 mm, black,
max. load 22 kg (BGI 810-3),
quick connector undetachably
2 x M6 fixing holes (d=73 mm),
1 x M10 fixing hole (center),
max. load 25 kg
bar: 269 mm, max. load 40 kg,
incl. (M10 x 70 mm socket head screw,
M10 hex lock nut and flat washer)
Order No. 08130/F/269/w (RAL 9010)
ball and socket joint flange (08125)
+ 08125/plate
for Wall Mount (03034)
M10 x 55 (screw),
polyurea coated
with grid plate, max. load 30 kg
Order No. 01282
with grid plate and
„balance correction“, max. load 40 kg
K&M, incl. wind up,
height 138,5 to 218 cm,
max. load 50 kg
K&M, height 137,5 to 218,5 cm,
max. load 50 kg
for A 3 front replacement,
foam in front of grille
Order No. 97006/compl/w
(RAL 9010)
for A 3 front replacement,
foam behind grille
Order No. 97006/hex/compl/w
(RAL 9010)
PowerCon-PowerCon / XLR-XLR
Order No. 08462 2,5 m
Order No. 08464 5,0 m
Order No. 08466 10 m
Order No. 08468 15 m
back