G Sub 1001 dp+/cinema

G Sub 1001 dp+/cinema

00605/dp+/cinema

Selfpowered,
2 x 500 W AES
Downloads
Data Sheet

The G Sub 1001 dp+ is a compact, high powered 10“ subwoofer with
an integrated 2 channel amplifier and DSP controller. Four different presets and volume settings are available to cater for a wide range of applications. The second amplifier can be used to drive a HiMid loudspeaker or a passive subwoofer. The particularly low-profile form and high power-handling capabilities make the G Sub 1001 dp+ especially interesting for applications requiring precise bass reproduction and very unobtrusive installation.


This subwoofer is also available with a lower tuning under the designation G Sub 1001 dp + / cinema.

Specifications
Speaker Components   10“
Description    Digitally Powered Bass Extension
Amp Power   250 W AES (single Mode) / 110 - 230 V
500 W AES (dual Mode) / 110 - 230 V
500 W AES / 4 Ω - HiMid/Sub
Rated Current   0,75 A @ 230 V
SPL   Peak @ 1 m   122 dB
Max. Input Signal   25 dBu
DSP   HDLM FPGA Processing 32 bit floating point
AD / DA   24 bit / 96 kHz
Latency   0,8 ms (analog in to analog out)
Usable Range  - 6 dB
  35 Hz - 120 Hz / 160 Hz (depends on preset)
Tuning Frequency   excursion minimum    39 Hz
Connectors


Neutrik XLR in/out
Neutrik PowerCon in/out
2 x Neutrik Speakon NL4MP out
Handles   1 x
Rigging / Fittings   M20 on top 
Weight   18,0 kg 
Size   height x width x depth   28,0 x 43,0 x 43,0 cm 
Order No.   00605/dp+/cinema
Accessories
x
Cover

for G Sub 1001, padded

Order No. 01226
x
MultiRigg™ light

version for fixed installations,
for horizontal and vertical alignment, tiltable vertical angle,
incl. accessories (2 x M10 x 20 socket head screws), max. load 50 kg

Order No. 01362
Ceiling Mount

for Subwoofer,
2 parts, incl. screws


Order No. 08129/w (RAL 9010)

Order No. 08129
Wall Mount

bar: 269 mm, max. load 40 kg,
incl. (M10 x 70 socket head screw,
M10 hex lock nut and flat washer)

Order No. 08130/F/269/w  (RAL 9010)

Order No. 08130/F/269
x
Speaker Pole

M20, with wind up

Order No. 03023
x
Speaker Pole

M20, adjustable

Order No. 03022
x
Hybrid Cable System

PowerCon-PowerCon / XLR-XLR

Order No. 08462    2,5 m
Order No. 08464    5,0 m
Order No. 08466    10 m
Order No. 08468    15 m

x
Feet

Foot, 38 x 10 mm, Rubber

Order No. 07611

 

Foot, 38 x 10 mm, Nylon

Order No. 07609