S-Series 4-Channel Amplified System Controllers

S-Serie

S 3

2,5 kW
4 x 600 W / 4 Ω

S 5

5 kW
4 x 1200 W / 4 Ω

S 10

10 kW
4 x 2400 W / 4 Ω

S 20

20 kW
4 x 4800 W / 4 Ω
Downloads
Datasheet
Hardware Manual
Software OCS-Setup_V4.2.6
Speaker Library
Firmware Update
S-Series API Documentation
Product Pictures

The 4-Channel Amplified System Controllers of the S-Series combine state-of-the-art power electronics with an advanced DSP that can be conveniently operated via the touch display.
With output powers from 600 W to 4800 W per channel, they cover a wide range of applications, from permanent installations to rental operations, from small configurations to large-scale sound reinforcement.
Its intelligent power sharing ensures that the available power is used very effectively when driving asymmetrical loads. Expandable with GPIO and Audio over Ethernet (AoE) according to the AES 67 standard.

Specifications
Model   S 3 S 5  S 10 S 20  
Description   4-Channel Amplified System Controller     
Total Power Supply Output
  2,5 kW 5 kW 10 kW 20 kW  
Output Power IEC*  
all channels driven/single channel (Watt)

* 40 Hz - 5 kHz,12 dB crest factor

8 Ω 
4 Ω
2,7 Ω
2 Ω
100 V  
70 V

4 x 600 / 1 x 1200
4 x 600 / 1 x 600
4 x 400 / 1 x 400
4 x 300 / 1 x 300
4 x 600 / 1 x 1200
4 x 600 / 1 x 900

4 x 1200 / 1 x 1200
4 x 1200 / 1 x 2400
4 x 1200 / 1 x 1700
4 x 1200 / 1 x 1200
4 x 1200 / 1 x 2400
4 x 1200 / 1 x 1800
4 x 1200 / 1 x 1300
4 x 2400 / 1 x 2500
4 x 2400 / 1 x 3300
4 x 2400 / 1 x 2500
4 x 2400 / 1 x 2500
4 x 2400 / 1 x 2500 
4 x 2400 / 1 x 3000
4 x 4800 / 1 x 6000
4 x 4800 / 1 x 6700
4 x 4800 / 1 x 5000
4 x 4800 / 1 x 5000
4 x 3500 / 1 x 3500 
 
Peak Output Voltage   150 V 150 V 150 V 235 V  
Peak Output Current   18 A 36 A 50 A 71 A  
Total Harmonic Distortions   < 0,05 %     
SMTPE   < 0,05 %     
Damping Factor (20 - 500 Hz @ 8 Ω)   > 500     
Crosstalk   (20 - 1000 Hz)
  > 70 dB (A)     
Signal to Noise Ratio (20 Hz - 20 kHz)   111 dB (A)  111 dB (A)  111 dB (A) 115 dB (A)  
Max DSP Input Level (balanced)   + 20 dBu + 20 dBu + 20 dBu + 20 dBu  
Voltage Gain   26 . . . 44 dB in 1 dB increments     
Cooling   front to rear airflow, temperature controlled fans  
User Interface   4.3“ touch display + push-encoder  
Inputs   4 x XLR analogue - 2 x switchable AES 3  
Outputs   4 x Speakon NL4 1+/-, 2+/-, 4 x XLR loop thru  
Connectivity   1 x USB-B, 2 x RJ45 w / ethernet switch  
Mains Connector   PowerCON®  PowerCON®  PowerCON®  PowerCON® 32  

Operating Mains Voltage

  90 - 265 V AC     
Current Draw (@1/8 output power)   2,1 A 3,7 A 7,3 A 14 A  
Power Consumption (idle/sleep/standby)   < 100 W (S 20: < 140 W) / < 40 W / < 5 W  
Protections   soft start, turn-on / turn-off transients, turn-on mute, over-temp, DC, RF, short circuit,
open / mismatched load, overload, clip limiter, mains breaker protection
 
Weight   6,7 kg 6,8 kg  7 kg 9,5 kg  
Size  height x width x depth (mm)
  88 (2HU) x 483 (19") x 330 (S 20: 360)  
Order No.   01823
01825  01827 01829  
   

01821/AES 67  (AES 67 Board)
01821/GPIO     (GPIO Karte)