S-Serie 4-Kanal System-Endstufen
S-Serie
S 3 |
2,5 kW 4 x 600 W / 4 Ω |
S 5 |
5 kW 4 x 1200 W / 4 Ω |
S 10 |
10 kW 4 x 2400 W / 4 Ω |
S 20 |
20 kW 4 x 4800 W / 4 Ω |
![]() |
|
Datenblatt S-Serie |
![]() |
Produktbilder |
![]() |

Die vierkanaligen System-Endstufen der S-Serie vereinen modernste Leistungselektronik mit fortschrittlichem, bequem über Touch-Display bedienbarem DSP.
Mit Ausgangsleistungen von 600 Watt bis 4800 Watt je nach Kanal decken sie eine große Bandbreite an Anwendungen ab, von Festinstallation bis Verleihbetrieb, von kleinen Konfigurationen bis zur Großbeschallung.
Das intelligente Power Sharing sorgt für eine sehr gute Ausschöpfung der zur Verfügung stehenden Leistung beim Antrieb asymmetrischer Lasten.


Technische Daten
Model | S 3 | S 5 | S 10 | S 20 | ||
Description | 4-Channel Amplified System Controller | |||||
Total Power Supply Output |
2,5 kW | 5 kW | 10 kW | 20 kW | ||
Output Power IEC* all channels driven/single channel (Watt) * 40 Hz - 5 kHz,12 dB crest factor |
8 Ω 4 Ω 2 Ω 100 V 70 V |
4x 600 / 1x 1200 |
4x 1200 / 1x 1200 4x 1200 / 1x 2400 4x 1200 / 1x 2400 4x 1200 / 1x 1700 4x 1200 / 1x 1700 |
4x 1200 / 1x 1300 4x 2400 / 1x 2500 4x 2400 / 1x 2500 4x 2400 / 1x 2500 4x 2400 / 1x 2500 |
4x 2400 / 1x 2500 4x 4800 / 1x 5000 4x 4800 / 1x 5000 4x 4800 / 1x 5000 4x 4800 / 1x 5000 |
|
Peak Output Voltage | 150 V | 150 V | 150 V | 220 V | ||
Peak Output Current | 18 A | 36 A | 50 A | 70 A | ||
Total Harmonic Distortions | < 0,05 % | |||||
SMTPE | < 0,05 % | |||||
Damping Factor (20 - 500 Hz @ 8 Ω) | > 500 | |||||
Crosstalk (20 - 1000 Hz) |
> 70 dB (A) | |||||
Signal to Noise Ratio (20 Hz - 20 kHz) | 111 dB (A) | 111 dB (A) | 111 dB (A) | 112 dB (A) | ||
Voltage Gain | 26 . . . 40 dB in 1 dB increments | |||||
Cooling | front to rear airflow, temperature controlled fans | |||||
User Interface | 4.3“ touch display + push-encoder | |||||
Inputs | 4 x XLR analogue - 2 x switchable AES 3 | |||||
Outputs | 4 x SpeakON NL4 1+/-, 2+/-, 4 x XLR loop thru | |||||
Connectivity | 1 x USB-B, 2 x RJ45 w / ethernet switch | |||||
Mains Connector | PowerCON® | PowerCON® | PowerCON® | PowerCON® 32 | ||
Operating Mains Voltage |
90 - 265 VAC | |||||
Current Draw (@1/8 output power) | 2,1 A | 3,7 A | 7,3 A | 14 A | ||
Power Consumption (idle/standby) | < 100 W / < 5 W | |||||
Protections | soft start, turn-on / turn-off transients, turn-on mute, over-temp, DC, RF, short circuit, open / mismatched load, overload, clip limiter, mains breaker protection |
|||||
Weight | 6,7 kg | 6,8 kg | 7 kg | 10 kg | ||
Size height x width x depth (mm) |
88 (2HU) x 483 (19") x 330 (S20: 430) | |||||
Order No. | 01823 | 01825 | 01827 | 01829 |