A 2 HiMid Sound System
A 2
00230/III |
400 W AES, 8 Ω |
00230/dp |
500 W / 150 W AES, bi-amped |
 Downloads |
|
| Datenblatt A2 |
 |
| Datenblatt A2 dp |
|
| Benutzerhandbuch A2 dp |
|
| 3D-Dateien A2 |
 |
| 3D-Dateien A2 Bracket |
|
| Ausschreibungstexte |
|
| Produktbilder |
|
Unauffällig elegantes und kräftiges System für die Festinstallation und Industriepräsentation. Die optimierte 2 x 6,5“/ 1” Treiber Konfiguration mit großem Horn sorgt für gutes Abstrahlverhalten, Sprachverständlichkeit und Reichweite. Vier M10 Aufnahmepunkte (optional fünf bei Austausch gegen die werkseitig montierte HS-Flanschbuchse) ermöglichen in Kombination mit dem Zubehör eine einfache Installation in
Horizontal- und Vertikalausrichtung.
Die A 2 ist auch als dp-Variante mit 500 Watt / 150 Watt AES Endstufenleistung und DSP-Controller lieferbar.
| A 2 | A 2 dp | |
| Speaker Components | 2 x 6,5" Nd (2" VC) / 1" (1,7" VC | 2 x 6,5" Nd (2" VC) / 1" (1,7" VC) |
| Description | HiMid Sound System | HiMid Sound System |
| Power AES / Peak | 400 W / 1200 W | - - - |
| Amp Power AES | - - - | LF: 500 W AES / 110-230 V HF: 150 W AES / 110-230 V |
| Impedance nominal | 8 Ω | - - - |
| Rated Current | - - - | 0,5 A @ 230 V |
| SPL 1 W / Peak @ 1 m |
97 dB / 128 dB | - - - |
| SPL Peak@1m | - - - | 128 dB |
| Max. Input Signal | - - - | 21 dBu |
| DSP | - - - | DPLMx FPGA Processing 32 bit floating point |
| AD / DA | - - - | 24 bit / 96 kHz |
| Latency | - - - | 0,8 ms (analog in to analog out) |
| Usable Range |
80 Hz - 19 kHz (-6 dB) | 80 Hz - 19 kHz |
| Tuning Frequency excursion minimum | 95 Hz | 95 Hz |
| X - Overpoint acoustical | 1,5 kHz | Depends on preset |
| Coverage horizontal / vertical | 90° x 60° - rotatable | 90° x 60° - rotatable |
| Connectors | 2 x Speakon NL4MP in/out Coding: 1 +/- HiMid, 2 +/- loop thru |
XLR in/thru, Ethercon Powercon in/out |
| Handles | 1 x | 1 x |
| Rigging / Fittings | 4 x M10, 2 x M6 35 mm pole mount |
4 x M10, 2 x M6 35 mm pole mount |
| Weight | 9,5 kg | 10,5 kg |
| Size height x width x depth | 51,0 x 21,0 x 21,0 cm | 51,0 x 21,0 x 21,0 cm |
| Order No. | 00230/III | 00230/dp |
for A 2, padded
Order No. 01243
for A 2,
with zipper
for A 2,
incl. (black version: 2 x M10 x 20 knurled screws, 2 x rubber washers
white version: 2 x M10 x 20 socket head screws, 2 x rubber washers)
Order No. 01214/set/w (RAL 9010)
for A 2,
horizontal alignment,
incl. (2 x M10 x 20 socket head screws,
2 x rubber washers, 1 x plate)
Order No. 01214/H/set/w (RAL 9010)
M10 x 20 mm
Order No. 73750/w (RAL 9010)
for A 2 / A 3 flying brackets,
horizontal alignment,
replacement for pole mount flange,
110 mm ø flange with M10 nut
Order No. 08119/M10/w (RAL 9010)
for flying brackets,
5 mm x 40 mm ø
with ball and socket joint,
with additional locking screw,
M10 x 15,
max. load 15 kg
reduction screw for fastening
M10 pole mount adapter (08126)
35 mm ø –> M10 x 16 mm,
M8 x 20 star knob screw
max. load 100 kg
Order No. 01223/100kg
incl. M10 Adapter,
max. load 15 kg
M10, max. load 20 kg
Order No. 01223/20kg
M10– DIN 580
black zinced
Order No. 73700/sw
zinced
10 mm internal thread,
28 mm ø
4 mm x 600 mm, black,
max. load 10 kg (BGI 810-3),
quick connector undetachably
2 x M6 fixing holes (d=73 mm),
1 x M10 fixing hole (center),
max. load 25 kg
Order No. 03034/w (RAL 9010)
Order No. 03034
bar: 269 mm, max. load 40 kg,
incl. (M10 x 70 mm socket head screw,
M10 hex lock nut and flat washer)
Order No. 08130/F/269/w (RAL 9010)
for permanent installation,
incl. tilt angle stop
M10, max. load 15 kg,
Order No. 08131/F/w (RAL 9010)
Order No. 08131/F
ball and socket joint flange (08125)
+ 08125/plate
for Wall Mount (03034)
M10 x 55 (screw),
polyurea coated
with grid plate, max. load 30 kg
Order No. 01282
with grid plate and
„balance correction“, max. load 40 kg
K&M, incl. wind up,
height 138,5 to 218 cm,
max. load 50 kg
K&M, height 137,5 to 218,5 cm,
max. load 50 kg
for A 2 front replacement,
foam in front of grille
Order No. 97004/compl/w (RAL 9010)
for A 2 front replacement,
foam behind grille
Order No. 97004/hex/compl/w (RAL 9010)
zurück