G 3 Curved Cylindric Wave Radiator

G 3

00550/80

1500 W / 225 W AES, 5,3 Ω / 5,3 Ω
80°

00550/120

1500 W / 225 W AES, 5,3 Ω / 5,3 Ω
120°

00550/dp/80

selfpowered Version
2400 W / 700 W AES
80°

00550/dp/120

selfpowered Version
2400 W / 700 W AES
120°
Downloads
Data Sheet G 3
Data Sheet G 3 dp
User Manual G 3 dp
german
3D-Files
3D-Files_Bracket
3D-Files_Stack Bracket
Connection Bar
Assembly Instruction
Bracket_german
Product Pictures

The G 3 system is a Curved Cylindrical Wave Radiator featuring the same technology as the GALEO Line Array. A single G 3 element is fitted with six 8” low-mid drivers and three 1.4” HF drivers in a 2-way active configuration, and has a fixed vertical dispersion of 20°.

By simply interchanging the horn located on the front of the cabinet, horizontal dispersion can be increased from 80° to 120°. The G 3 provides a longer throw, a higher sound level before distortion and a more precise directivity than a comparable conventional horn loaded system. The low end cut off at 80 Hz allows the G3 to harmonise very well with high power 18" or 21" sub woofers.

The tilt and pivot bracket included as standard allows simple set up and alignment of the system. Separately available screw on flying hardware allows multiple G 3 units to be combined to form a larger system. Both ground stacked and flown applications are possible.

The G 3 is also available in the self powered dp version.

  •  
  •  
  •  
  •  
  •  
Specifications
  G 3  G 3 dp
Speaker Components 6 x 8“ Nd / 3 x 1,4“ Nd 6 x 8“ Nd / 3 x 1,4“ Nd
Description Curved Cylindric Wave Radiator Curved Cylindric Wave Radiator
Power   AES / Peak LF: 1500 W / 4500 W
HF: 225 W / 675 W
- - -
Amp Power - - - LF: 2400 W AES / 110-230 V
HF:  700 W AES / 110-230 V
Impedance   nominal LF: 5,3 / HF: 5,3 Ω - - -
Rated Current - - - 2,9 A @ 230 V 
SPL   1 W / Peak @ 1 m
LF: 104 dB / 138 dB
HF: 111 dB / 140 dB
- - -
SPL   Peak @ 1 m - - - 140 dB
Max. Input Signal - - - 25 dBu
DSP - - - HDLM FPGA Processing 32 bit floating point
AD / DA - - - 24 bit / 96 kHz
Latency - - - 0,8 ms (analog in to analog out)
Usable Range
80 Hz - 18 kHz (- 6 dB) 80 Hz - 18 kHz (- 6 dB)
Tuning Frequency   excursion minimum 90 Hz 90 Hz
X - Overpoint   acoustical Depends on preset Depends on preset
Coverage   horizontal / vertical 120° x 20° (120°-version)
80° x 20° (80°-version)
120° x 20° (120°-version)
80° x 20° (80°-version)
Mechanical Splay Angle 12° 12° 
Connectors 2 x Neutrik Speakon NL4MP in/out
Coding: 1 +/- HF, 2 +/- LF
Neutrik XLR in/out
Neutrik PowerCon in/out 
Handles 2 x 2 x
Rigging/ Fittings 8 x M10
Inclusive flying bracket
8 x M10
Inclusive Flying Bracket
Weight 41,5 kg 43 kg 
Size   height x width x depth 67,1 x 51,2 x 48,2 cm 67,1 x 51,2 x 48,2 cm 
Order No. 00550/120 (120°-version)
00550/80  
(80°-version)
00550/dp/120 (120°-version)
00550/dp/80   
(80°-version)
Accessories
Cover

for G 3

Order No. 01236
Rain Cover

for G 3

Order No. 01236/outdoor
Flight Case

for 2 pcs. G 3 units and accessories, heavy duty, 9 mm birch multiplex, PVC coated, loading measurements, 10 x recessed sprung handles, 4 x butterfly catches, 2 x scanner windows, 4 x 100 mm blue wheels, 2 pcs. with brake, partition walls, interior lined with felt

Order No. 16007
19” Rack

6 units, prepared for 2 x LAB amps,
HDLM 8, connection panel,
incl. internal cabling and installation

Order No. 10510
Steel Support

for groundstack
GALEO / G 3 / K 24,
length 30 cm / 60 cm,
incl. accessories (45 mm ball lock pin, adjustable, with add. safeguard)

Order No. 01383/60 (length 60 cm)
Order No. 01383/30 (length 30 cm)

Flying Bracket

for G 3 incl. accessories:
4 x M10 x 20 handle screws

Order No. 01350/set
Connection Bar

long - up to 4 units, incl. screws

Order No. 08147/set

 

short - for 2 units, incl. screws

Order No. 08146/set
Connection Bar

G3 / G3 Connector,
only for groundstack,
for 2 units, incl. screws

Order No. 08147/G3->G3i
Stabilisation

for G 3 bracket

Order No. 01350/stab/set
Tilt Enhancer

for G 3 bracket

Order No. 01350/tilt-enhancer
AMR Reflectors 120°

for Galeo / G3,
consisting of 2 pcs.
AMR reflectors 120°,
incl. fittings

Order No. 08141/120
AMR Reflectors 80°

for Galeo / G3,
consisting of 2 pcs.
AMR reflectors 80°,
incl. fittings

Order No. 08141/80
Flange

for Galeo S / G 3 / GL 16 / GL 24 / K 24 flying bracket,
M20 x 35 mm ø with nut,
incl. M20 x 20 socket head screw

Order No. 08127/nut
Doughty Trigger Clamp

for flying brackets,
SWL 200 kg

 

Order No. 01222
Ergostyle Lobe Knob

for flying brackets, M10 x 20,
with grip, adjustable

Order No. 08171
Handle Screw

for Flying Brackets, adjustable
M10 x 30

Order No. 08375/30
Steel safety cable

4 mm - 50 cm

Order No. 01376
TV Adapter

M20 external thread,
28 mm ø

Order No. 08128/M20
Chain Fastener

VBS 7 mm

Order No. 01378
Ring Screw

M10– DIN 580, black zinced

Order No. 73700

 

M20– DIN 580, black zinced

Order No. 73900
Speaker Stand

Incl. wind up, K&M
50 kg max., height 129 to 204 cm

Order No. 03011
Hybrid Cable System

PowerCon-PowerCon / XLR-XLR

2,5 m Order No. 08462
5,0 m Order No. 08464
10 m Order No. 08466
15 m Order No. 08468